The dress will realize that this guide is suitable for special occasions and can be worn by girls. The simple bodice is embellished with sequins and a beautiful flower, and the long skirt makes it perfect for a dance. To achieve this you can use the shiny silk dress, but in the case of a summer dress, a printed cotton can go very well.

First, using the patterns for wedding dress long , cut a bodice front and two behind both the main fabric in the lining, making sure that there is a right and a left to each tissue. now, right against right, blocks, and sew, preferably by machine, the pieces of the bodice back to the front for back. Stretch the seams, and then repeat the process with the pieces of the lining.

sew_dress

At this point, right against right, still with pins and sew the lining to the fabric around the neck and armholes, aligning the shoulder seams. Now trim the edge to five millimeters and facing right. Stretch with precision, so that the lining is not visible from the front. Now cut two long pieces of ribbon forty centimeters of sequins, Forms one with the pins on the front of the bodice to two centimeters from the edge and the second about an inch and a half from the first . Frees sequins and not only the fabric of the lining, then sew them in the machine, stitching directly to the center of the ribbon sequins and cut off the ends.

Once done, right against right, pointing with pins and join the machine the pieces of the bodice along the side edges of the front and back. Repeat with the lining out and press the seams to open. Now for the skirt, cut to the front of a piece of forty-two eighty-eight inches and two pieces for forty-seven of forty-two inches to the rear. Now run a zigzag on all edges of each piece, right against right foot down, and sew the pieces back to the front side seams, making sure that the outer edges are perfectly aligned, then iron the seams.

Along both edges of the central back of the skirt, reverse bending an inch and then again four centimeters. Stop with the pins and stitching close to the first bending on both sides to form an overlap. Now, with needle and thread , works a line running stitch all around the top edge of the skirt. Starting from the vertical seam on the back of the skirt, so that the overlap remains flat, curls the skirt. Curls behind a piece of a width of eighteen centimeters , including the overlap, and realizes some points on the edge side to lock the thread. Now curls the front part of the thirty-two centimeters, always stopping the wire with some points on the edge side. Finally, curls the other part of the behind eighteen centimeters , including the overlap, as before.

At this point, right against right, aligns the edges, supports the skirt to the lower edge of the front of the bodice. Now stop and baste with pins, making sure that the curl is uniform. Sewing machine and iron the seam to the bodice . Now, along the lower edge of the lining of the bodice, reverse bending an edge of one centimeter . Stop with pins and sew by hand, aligning the folded edge of the seam so that the front of the dress do not see the point.

Now, once you have arrived at this point in the project, to the hem at the bottom of the dress, fold an inch and then another inch and a half all the way around . At this point, sew by hand or machine and ironing all the clothes. Now, mark the position of the eyelets and realizable spiral. To complete this work, you go to sew the buttons on the overlap, at the eyelets.